Welding Machines for Mesh and Panels
These machines allow the production of mesh panels or fences in rolls, with equal or different pitches.
Machines feed and straighten wire directly from coil, as well for longitudinal and crosswires.
A wide variety of accessories is available for the manufacture of specific products, to avoid costly secondary operations:
- Bending of V-shaped re-enforced meshes
- Bending of cable trays
- Corrugation of “Zigzag” separators
- Fabrication of spacers
- Re-cutting of panel ends
The production changeover time has been very carefully reduced to a minimum, thanks to the use of innovative, efficient and easy to implement mechanical devices.
|Maximum panel dimensions (mm)||1200 x 3000||1800 x 3000||2500 x 4000||2500 x 4000|
|Max. nb. of longitudinal wires||20||20||20||40|
|Minimum pitch for longitudinal wires||25||25||50||50|
|Max. number of crosswires||∞||∞||∞||∞|
|Minimum pitch for crosswires||12||12||12||12|
|Wire diameters (mm)||1,5 – 5,0||1,5 – 5,0||2,0 – 8,0||2,0 – 8,0|
|Nb. of transformers||5||5||5||10|
|Each transformer’s power (kVA)||100||100||100||100|
|Bending for cable trays||✓||✓||–||–|
|Bending for panel fences||–||–||✓||✓|
|Welding of tubes on mobile fences||–||–||✓||✓|
Motorized setting of straightening fingers
Exit of panels
Sample of finished product